What Precautions Should Be Taken When Buying And Installing A Kitchen Sink?

​When buying a kitchen sink, you need to check whether the welding part of the kitchen sink is intact, whether there are cracks in the splicing part of each pipe, and whether the sealing ring is misaligned or damaged, otherwise it may leak and cannot be used after a few days. In addition, check whether the muffler block has been debonded, and finally, check whether the sink accessories are complete.

There are some precautions for us to know when installing the kitchen sink:

1. Before installing the water tank, the water pipe must be drained. When installing the water tank, the water in the pipe must be drained to prevent the water pipe from rusting and leaking in the future.

2. Before installing the kitchen sink, the sink drain hole should be left in the kitchen sink cabinet and an angle valve should be installed.

3. Before installing the faucet, the faucet should be packaged in a plastic bag to avoid scratching the outer wall of the faucet.

4. Distinguish the hot and cold pipes of the faucet. Be sure to turn off the water valve before installation to avoid being scalded by hot water.

5. During the installation of the water tank, the threaded pipe must be tightened to avoid water leakage due to poor sealing. But also be careful to avoid damaging the screws with excessive force.