How to choose a Handheld Shower

1. Whether the electroplating layer is smooth and smooth. Generally speaking, from the surface of the handheld shower, the brighter and more delicate it can be seen by the naked eye, the better the coating process is. Showers generally use all-copper pipes. The copper pipe body has a crisp sound when knocked, while the cast iron pipe has a low and dull sound. Alternatively, you can hold the pipe body with your hands and release it after 2 or 3 seconds. If the mist on the pipe body does not disperse for a long time, it is most likely a cast iron pipe. If the pipe body hardly changes after your hands are removed, it is basically OK. It can be determined to be a copper pipe.

2. Ask about the material and service life of the shower switch valve core. A good shower switch valve core is made of ceramics fired through a special process. It has extremely high hardness and its service life must reach the national standard of 200,000 times.

3. Pay attention to the height between the handheld shower and the ground and choose wisely. When purchasing a showerhead, you must pre-measure the distance between the showerhead and the ground, as well as the height of the water inlet and outlet from the ground during hydropower construction. In addition, the shape of the water pipe connected to the top of the shower head comes in various shapes, so the height of the bathroom ceiling should be considered when choosing.

4. Pay attention to the water pressure of the handheld shower. Large shower heads on the market are generally a large disc, and some styles are designed to diverge from a point in the middle. Each small tube has many small holes, and some are designed to rotate. But if the water pressure in your home is low, it will be difficult for the divergent shower head to discharge water evenly.